Gas Furnace Maintenance: Common Heating Repair Solutions


Creating a gas furnace is a superb strategy to heat your property in the cold months of winter. However, because the system ages, you can find problems arising that will need a heating repair technician. Once you know what some of the most common problems and possible causes are, you’ll be able to provide your service technician a better description of the problem, making their job easier.

No Heat

Probably the most obvious problem is there isn’t any heat originating from your furnace. When you call your service technician, check to ensure the thermostat is just not set way too low. If not, double check the circuit breaker is just not tripped. The pilot light may also be out.


There are more, more serious logic behind why your furnace might not be blowing heat. There may be an ignition problem, that could be intermittent. You can even use a control valve issue where it really is stuck closed. Additionally, the thermostat could be to blame, since it is not functioning anymore. Because of these problems, you should engage a heating repair shop.

Not Enough Heat

One’s body is blowing heated air, which is good. However, it’s not at all blowing enough hot air to your where you can be effective. Most likely, you need to clear an obstruction or dirt somewhere. When you call someone, replace your furnace filter to make certain this is simply not the problem. You must replace your filter monthly to make certain air is becoming to your system. If the doesn’t work, a tech should clean the machine and readjust the gas burners. This can drive out any dirt or obstruction maintaining your warmth from your own home.

Furnace Cycles Too Frequently

Your house could be toasty, but you hear it turning on and off over it should. There could be various issues occurring. The initial being an airflow problem. Make sure you replaced your air conditioner filter. However, that can be a could be the simple fix, thermostat problems may cause the cycling. The warmth anticipator is often a device within the thermostat that tells your furnace when you run. An anticipator adjustment can make it a little less sensitive.

If the anticipator is scheduled properly, the cycling problem could be a blower issue. Your technician can confirm the lubrication on blower motor assembly. She or he also needs to check the belt tension to make certain it can be tight, and replace any frayed belts.

Always Running

Sometimes, the blower does not cycle too often. Instead, it never stops running. Someone accidentally setting the thermostat to fan continuously might cause this concern. It is just a simple mistake. However, if your thermostat won’t have a fan setting, the situation could possibly be with all the fan limit control switch. A heating repair provider can deal with this problem.

Heating repair is a type of occurrence for homeowners. In order to avoid these types of issues, you need to have your unit inspected each fall, prior to use. The technician can replace worn out belts and clean burners and passages to ensure the body runs all winter long.